Course description
BASIC PRINCIPLES of Integrated circuit technologies, CMOS, BiCMOS and comparison. Active and passive devices available in base-core module of the CMOS technology and their models.
Parameters and devices performance comparison with scaled down technologies to 100 nm and beyond. Basic lithographic steps for CMOS circuit fabrication.
IC CIRCUIT DESIGN: overview of integrated circuit specifications, circuit geometry, design rules, process documentation.
Professional CAD tool CADENCE overview for schematic and geometry entry, circuit simulation, analysis and optimization.
Chip geometry design, constrains, design rules (DRC), technology limitations, mixed signal A-D circuit guidelines. Parametric analysis.
DIGITAL BLOCKS: basic logic and sequential blocks on MOS device level (NAND, NOR, INV, D-FF).
ANALOG BLOCKS: Circuit parameters, requirements and constraints, basic guidelines. Basic building blocks design as current mirrors, current and voltage references, bandgap reference sources, low noise amplifiers, power amplifiers, current and voltage comparators and their applications.
I/O PERIPHERAL structures for electrostatic discharge (ESD), electromagnetic compatibility EMC, and robustness to latch-up.
SENSORS ON ASIC: presentation of different sensors as a part of integrated circuit and their signal processing
Course is carried out on study programme
2nd Cycle Postgraduate Study Programme in Electrical Engineering
Objectives and competences
This lecture builds the foundation for understanding the analogue integrated circuit design. The objective is to become familiar with the many technology fundamentals required to design high-performance analog circuits. This is training for thinking and finding solutions.
Learning and teaching methods
Lectures are prepared in Slovene language, projected and on board, literature in English and Slovene language; lab work in Linux environment, project oriented lab work on 180nm (supported by EUROPRACTICE and LNIV) in CADENCE environment. Lab work based on individual work – each student on individual workstation.
Lectures attempts to present the critical concepts of VLSI without complicated system analyses.
Intended learning outcomes
Key skills and abilities after completion of the module:
- Present the results of research and lab work.
- Resolve tasks with an engineering approach.
- Construct standard Device Specification Documents.
- Evaluate analog device parameters.
- Develop an analog integrated circuit based on predefined electrical specifications and technological constraints.
- Select the most suitable technological devices for the realization of the desired IC sub block.
- Evaluate the suitability of solutions in nanometer CMOS technologies.
- Introduction in the CADENCE – modern IC design environment.
- Introduction with the state-of-the-art trough industrial projects on the microelectronic field.
Reference nosilca
- SEŠEK, Aleksander, MAKAROVIČ, Kostja. Metallization, material selection, and bonding of interconnections for novel LTCC and HTCC power modules. Materials. Feb.-1 2022, vol. 15, no. 3, str. 1036-1-1036-13, ilustr. ISSN 1996-1944
- SEŠEK, Aleksander, ŽEMVA, Andrej, TRONTELJ, Janez. A microbolometer system for radiation detection in the THz frequency range with a resonating cavity fabricated in the CMOS technology. Recent patents on nanotechnology, ISSN 1872-2105, 2017, vol. 11, no. 3, str. 1-11, ilustr.http://www.eurekaselect.com/153696/article
- SEŠEK, Aleksander, CHAMBERS, Olga, TRONTELJ, Janez. Study on the die-attach voids distribution with X-ray and image processing techniques. Journal of electronic packaging : Transactions of the ASME, ISSN 1043-7398, Mar. 2019, vol. 141, no. 2, str. 1-7, ilustr.http://electronicpackaging.asmedigitalcollection.asme.org/article.aspx?articleID=2724836
- ŠMELCER, Žiga, SEŠEK, Aleksander. A low distortion audio amplifier = Avdio ojačevalnik z nizkim popačenjem. Informacije MIDEM : časopis za mikroelektroniko, elektronske sestavne dele in materiale. [Tiskana izd.]. 2022, letn. 52, št. 2, str. 117-127, ilustr. ISSN 0352-9045
- CHAMBERS, Olga, SEŠEK, Aleksander, RAŽMAN, Rok, TASIČ, Jurij F., TRONTELJ, Janez. Fertiliser characterisation using optical and electrical impedance methods. Computers and electronics in agriculture, ISSN 0168-1699. [Print ed.], Dec. 2018, vol. 155, str. 69-75, ilustr.https://www.sciencedirect.com/science/article/pii/S0168169918307956
Study materials
- P.R. Gray, "Analysis and Design of Analog Integrated Circuits," John Wiley & Sons, Inc. 2001,
- C. Tomazou, G. Moschytz, B. Golbert, "Trade-offs in Analog Circuit Design," Kluwer 200
- R.J.Baker, "CMOS: Circuit Design, Layout, and Simulation, 2nd, Revised Edition," Wiley 2007,
- A. Pleteršek, "Načrtovanje analognih integriranih vezij v tehnologijah CMOS in BiCMOS, " 2. Izpopolnjena izd. Ljubljana: Fakulteta za elektrotehniko, 2017,
- Predavanja se posodabljajo vsako leto in so skupaj z nalogami in vajami na razpolago na spletni strani predmeta: http://lniv.fe.uni-lj.si/courses/aivs/AIVS_Predavanja_2122.pdf